Drake:

Who is manufacturing the racking? DPW has worked with us to develop some screening options. WE have also developed our own screening (and wire management) procedures. We spend a lot of time creating these procedures we keep them to ourselves to prevent local competitors from stealing appropriating ideas. I can give you more ideas off list.

I think we all need to be calling racking manufacturers and requesting they develop screening and wire management options for their products.

William Miller



At 09:34 AM 10/21/2010, you wrote:
Hello Wrenches,

We are installing a ground mount system with Enphase inverters. 690.31 requires readily accessible source and output conductors OPERATING at over 30 volts to be installed in a raceway. The Vmp of the REC230PE modules is 29.4 volts. Of course it would go higher in cold weather. Do I have any argument that would allow us to not install the DC conductors in a raceway?

The NEC Handbook comments "Most PV modules do not have provisions for attaching raceways. These circuits may have to be made "not readily accessible" by use of physical barriers such as wire screening".

I have heard of a green screening material that has been used on the E, W and N sides of ground mounts to render the area not readily accessible. Does anyone know what this is? What else would work that would be more cost effective than running a chain link fence around the array?

Thanks,

Drake
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.448 / Virus Database: 271.1.1/3210 - Release Date: 10/21/10 06:34:00

Please note new e-mail address and domain:

William Miller
Miller Solar
Voice :805-438-5600
email: [email protected]
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to