Hi Jason, I can get wifi there, but I don't think it reaches this site without some power upgrades. Just makes it way easier to plug the envoy into the main house right next to the router. but given all thegreat advice from everyone I know that I can get it done one way or the other, but I'm going to try the usual way first.
have a nice weekend, jay peltz power On Nov 6, 2010, at 4:48 AM, Jason Szumlanski wrote: > Obviously satellite Internet is an option, but not exactly cost > effective for just PV monitoring. I've been begging Enphase to upgrade > the Envoy interface to at least allow per-module performance tracking in > text, if not a full graphical interface. We have a couple customer > locations where cable/DSL Internet is not available, and our customers > are quite upset that they cannot access per module data. As an > installer, so am I. It's nice to see inverter status, but I'd like to > see the power generated also on the local interface. > > Jason Szumlanski > Fafco Solar > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Glenn > Burt > Sent: Friday, November 05, 2010 1:38 PM > To: 'RE-wrenches' > Subject: Re: [RE-wrenches] enphase AC carrier length > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
