Re: [RE-wrenches] Code switch heights

[Allan Sindelar]

Bob, This came up once years ago. I recall that there is no minimum height in the Code for your application. Allan Sindelar Allan@positiveenergysolar.com NABCEP Certified Photovoltaic Installer EE98J Journeyman Electrician Positive Energy, Inc. 3201 Calle Marie Santa Fe, New Mexico 87507 505 424-1112 www.positiveenergysolar.com On 11/26/2010 5:11 PM, bob ellison wrote: I am looking at installing 4 inverters in a system, 1 on an e panel and 2 SW 4048’s and also a SW plus. So its an interesting mix, 3 are just to cut the generator run time for the diesel generator.   I am trying to find the allowable range for switch heights for all the gear. Seems the upper limit is about 6’ but I am unsure on the lower limit.   Any ideas?   Thanks, Bob Ellison No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 426/3281 - Release Date: 11/26/10 _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org