HI Dana, Contact the folks at Canyon industries they can set you up.
The UL part might be a problem however. jay peltz power On Feb 13, 2011, at 4:33 PM, Dana wrote: > Hey all – > > I have client that wants to do 4-20 KW hydro at 480VAC/3P , 1500’ run to a > converter/ inverter step down to 240VAC/1P. > > Any suggestions on a step down that is UL and grid tie enabled and rated? > > Dana Orzel > Great Solar Works, Inc > E - [email protected] > V - 970.626.5253 > F - 970.626.4140 > C - 970.209.4076 > web - www.solarwork.com > > "Responsible Technologies for Responsible People since 1988" > Do not ever believe anything, but seriously trust through action. > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
