Re: [RE-wrenches] Top of POST mount

[dan]

Just one Panel? depending on budget I'd either cobulate something out of Unistrut.. or You might find a metal fab shop to make you something... You wouldn't be the first.. Good luck.. db

Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44

-------- Original Message --------
Subject: [RE-wrenches] Top of POST mount
From: "Jason Szumlanski" <ja...@fafcosolar.com>
Date: Tue, March 22, 2011 7:51 am
To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org>

I’m looking for a solution to mount a 230W module on the top of an existing 6x6 wood post. It can be side of post mounted, but I’d prefer top of post to get it up a little higher. Any ideas/products appreciated.

 

Jason Szumlanski

Fafco Solar

 

---

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org