Hi, Nathan~ The Morningstar Relay Driver doesn't care regarding the channel number to which a certain trigger has been assigned. The unit will act when your parameters are met regardless of the channel number hierarchy.
I wish that M-star had some "wizard type" Windows software that could lead one through the setup. The capabilities of that hardware are huge if only one can navigate the configuration issues. Adam Kehlenbeck at Morningstar provided me with good technical support in 2010. If you contact him be sure to ask if he or another M-star technician would be willing to join the Wrench List in order to educate us all. The manus would all save time & trouble if they would address technical issues in an "broadcast" fashion; the Wrench List is the perfect medium for that. Adam's contact info is as follows: Voice: 1-410-312-9161, option 4 email: akehlenb...@morningstarcorp.com<http://www.google.com/contacts/a/c/abrahamsolar.com/ui/ContactManager?titleBar=true&hl=en&dc=true#> Jolliness, Mick Abraham, Proprietor www.abrahamsolar.com Voice: 970-731-4675 On Wed, Apr 13, 2011 at 9:54 AM, Nathan Jones <solardud...@yahoo.com> wrote: > Wrenches, > I am trying to configure a Morningstar relay driver and am not sure I have > the setpoints in the right sequence. I have the settings loaded into a file > on the laptop with progressively higher battery voltages triggering more > diversion loads but I'm not sure I have the correct order for this to occur. > I started with channel 2 as the first trigger point and then used channel > one as a second, or higher battery voltage diversion. Does it matter which > channel is used progressively or will it default to whatever setting > regardless of which channel? > I would like to know I have this thing right so I don't have to field > configure. Any input is appreciated as I have never used one of these units. > Thanks, > Nathan Jones > Power Source Solar > 417 827 0738 > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org