Hi Jesse, I like the EJOT, works well.
However check to see where the ribs are in relation to the trusses. In my experience the rib is always right over or in the way getting to the truss. In which case its back to blocking or similar so you can mount on the flat sections. jay peltz power On May 4, 2011, at 5:50 PM, Jesse Dahl wrote: > Wrenches, > > I will be installing system on a metal roof this summer and I am looking for > some advice. The roof is metal with 2x4 wood trusses. There is no standing > seam to attach to, so I am looking at a Ejot type attachment system. The > modules are Silicon-energy cascade series. > > Any tips or advice on mounting to this roof type or mounting this type module > would be greatly appreciated. > > > Jesse Dahl > > Sent from my iPad!!! > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org