Yes, I am forgetting the TED also. I still have not gotten an answer from TED,
however the voltage is 3.0 volts full current where the Egauge is 0.333 volts
full scale. ;So my TED CTs will not work, however I was going to try a 10 to 1
voltage divider on the TED CT, I have just been to busy to test. I am going
to
test at 100k to 10K and at 10K to 1k if it works I will let wrenches know.
DT.
________________________________
From: Jason Szumlanski <[email protected]>
To: RE-wrenches <[email protected]>
Sent: Sun, May 15, 2011 2:41:38 PM
Subject: Re: [RE-wrenches] TED CT voltages. Egauge
I can’t answer your question, but I can tell you that we also abandoned TED .
The product is flaky and the support is poor. We’re experiencing repeated
call-back from a few customers. We looked at eGauge closely and settled on
Galtronics’ solution called symHome (http://www.mypowerbill.com/). We’re
installing our first units soon and hoping for fewer interference issues, solid
hardware, and excellent customer service. We met the guys from the company at
our office and got a good feeling. Their web interface is far superior to
anything else I’ve reviewed. We’ll see!
Anyone buying TEDs and TED parts out there? ;)
Jason Szumlanski
Fafco Solar
From:[email protected]
[mailto:[email protected]] On Behalf Of Darryl Thayer
Sent: Sunday, May 08, 2011 1:49 AM
To: RE-wrenches
Subject: [RE-wrenches] TED CT voltages. Egauge
Hi does anyone know what the TED current transformer voltage is? I am quiting
my TED attempts and going over to Egauge, does anyone know is the TED based on
0.333 volts full scale? I have asked them three times and they never answer.
I
was hoping to salvage the CTs and use on Egauge.
Thank you
Darryl
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
