Hi Phil,
I was the tech consultant for a project that installed 100 KWs on a
federal facility. I inspected the install - modules looked pretty
standard. Frames seemed pretty stout - some corner alignment mismatch
but nothing to write home about and the install went well - no
complaints from the install crew - crystals looked fairly uniform - data
showed no bad modules - Potting seemed good.
That's what I know.
Best,
Jeff Clearwater
Village Power Design
Phil Schneider wrote:
Have any of you installed Unicor/Federal Prison Industries PV
modules? I suspect there are some opinions out there... I appreciate
your input.
P.
Phil Schneider
*Creative Energies**
Lander, WY office*307.332.3410 *____ <http://goog_93748069/>_
_
**
Victor, ID office 208.354.3001
Salt Lake City, UT office 801.487.6489
Cell 307.438.1195 • Fax 888.456.6625
www.creativeenergies.biz <http://www.creativeenergies.biz>
*
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options& settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules& etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
