Snap On... and I believe they will calibrate it for free for life Tom Duffy
Systems Design Engineer
[email protected]
575-539-2111 X 301
Although no trees were killed in the sending of this message, a large number
of electrons were terribly inconvenienced.
Confidentiality Notice: This message including any attachments is for the
sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender and delete any copies of this message.
_____
From: [email protected]
[mailto:[email protected]] On Behalf Of Jason
Szumlanski
Sent: Friday, July 08, 2011 7:02 AM
To: RE-wrenches
Subject: [RE-wrenches] Torque Wrenches
I'm looking for a recommendation on a good torque wrench for installing S-5
clamps. I saw the past posts on torque screwdrivers, but I'm looking for a
wrench calibrated to the 100-150 in-lbs range.
Jason Szumlanski
Fafco Solar
<<image004.jpg>>
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
