Dana:

You're probably talking about a PV to 12V solution. The battery banks in EVs are high voltage (to minimize I2R losses).

And I'm sure that "...bypassing or paralleling the internal controls..." will result in a voiding of the EV warranty.


Regards,


Gary Willett, PE
[email protected] <mailto:[email protected]>


On 7/14/2011 5:32 PM, Dana wrote:

Hey Allan,

We did freestanding golf cart charger direct dc array to charger controller with a direct coupler to the golf cart's battery. Works just like an off grid system.

Could you do the same for a car? Bypassing or paralleling the internal controls...........

Dana Orzel

Great Solar Works, Inc

E - [email protected]

V - 970.626.5253

F - 970.626.4140

C - 970.209.4076

web - www.solarwork.com

"Responsible Technologies for Responsible People since 1988"

Do not ever believe anything, but seriously trust through action.

*From:*[email protected] [mailto:[email protected]] *On Behalf Of *Allan Sindelar
*Sent:* Thursday, July 14, 2011 2:43 PM
*To:* RE-wrenches
*Subject:* [RE-wrenches] Fwd: Car charging station without grid

Wrenches,
I'm stumped as to the best approach for a customer who wants a non-grid-tied, batteryless PV-powered EV charging station. See below, from one of our salespeople. Any ideas?
Thank you,
Allan



_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options&  settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules&  etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to