Lightening has a high voltage and HIgh current and High frequency.  The 
lightening has gathered it energy over a large area, It has either picked up 
electrons or lost electrons to generate this large Potential The electrons want 
to return to the earth, So you do not want that path to be through your 
equipment.  
1) ESTABILSH A GOOD GROUND ROD ( i had a system that had blown up about 3 
times, I drove a 3/4" sectioned ground rod 80' and then drove another about 20  
feet away.  Tied the two together and to the frames of my modules.  Then I took 
aand connected to the module conductors, using a MOV similar to what Midnight 
solar sells.  The system is in a higher relative area, this I did in 2003 it 
has never blown up since   

From: James Rudolph <[email protected]>
To: RE-wrenches <[email protected]>
Sent: Friday, September 9, 2011 11:32 AM
Subject: [RE-wrenches] Designing PV systems for lightning prone areas



Dear Wrenches,

Does anybody have any best practices for designing large PV arrays on metal 
building in lightning prone areas? Lightning arrestors on the DC side and Surge 
suppressors on the AC load side? Any input or resources would be greatly 
appreciated.

Sunny Regards,
 
James Rudolph
NABCEP Certified Installer
Master Electrician
SF Energy




>
> 
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: [email protected]
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>
>

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to