We have had two 210's go dark. With SunPower 225. We keep one spare 210 in stock (have not had any 190's go yet). In a message dated 11/3/2011 2:27:30 P.M. Pacific Daylight Time, [email protected] writes:
For the first time, several weeks ago, after 40-50 Enphase installs, we’ve come across at least two M210s that we putting out consistently lower outputs than their immediate neighbors. We replaced the two mods first, which made no difference. Then, in consultation with Enphase, replaced the M210s. After replacing them, the power output was as it should be. Now I’ve got another suspect system with several underperforming mods out of (36). Has anyone else had this experience? Thanks, marco _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
