Joel, I agree with Ray. I did the exact same thing with an MX 60 upgrade and some more modules. Customer was very happy with the improved performance. I had no luck getting a replacement PM-60 and that was several years ago.
John Blittersdorf -----Original Message----- From: Joel Davidson <[email protected]> To: RE-wrenches <[email protected]> Sent: Mon, Nov 7, 2011 12:31 pm Subject: [RE-wrenches] Faulty PM-60 circuit board Wrenches, My customer has a circa 2001 Pulse PC250 with a faulty PM-60 circuit board C-750, REV D2 (the microprocessor U1 has v2.5 and v1.01 written on a label n it). Does anyone repair or have replacements for PC250 PM-60 circuit oards? If not, what do you recommend? Thank you in advance for your help. Joel Davidson ______________________________________________ ist sponsored by Home Power magazine List Address: [email protected] Options & settings: ttp://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: ww.re-wrenches.org/etiquette.htm Check out participant bios: ww.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
