Hello,
The Sunny Tower has four individual fuse holders on the DC input of each inverter. I am combining the array output for each inverter in a combiner box before the tower, so there is only a single positive, negative, and gnd going to each inverter's DC input. I want to fan this input out to each of the four dc fuses via a combiner bus with a single lug and prongs which fit directly into each fuseholders' input, ala the Outback combiner bus. Is there something similar made for the SunnyTower dc input? I have not been able to talk to SMA yet about this. Thanks. Kirk Herander VT Solar, LLC dba Vermont Solar Engineering NABCEPTM Certified installer Charter Member NYSERDA-eligible Installer VT RE Incentive Program Partner
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
