We have been using the AET RayPort on the last few jobs. Much like the RapidRac in design, but made of stainless steel.
Goes together quickly. Looks good, easy grounding. Slight drawback is walkability between rows is a little more tricky. http://aetenergy.com/products/ YMMV Glenn From: [email protected] [mailto:[email protected]] On Behalf Of Orion Thornton Sent: Tuesday, February 21, 2012 8:13 PM To: RE-wrenches Subject: [RE-wrenches] 10 Degree Ballast Racking--Recommendations Hi Wrenches, I was hoping to get a little feedback on what folks are installing and what they prefer for 10° tiltfully ballasted racking systems. So far we have worked with SunPower T10, Unirac RapidRac, and PanelClaw. There has been positive feedback from our installation for the PanelClaw system and SunPower T10, but I would be curious to know some other good options, taking into consideration design support, ease of installation, and grounding integration. Thanks in advance for any insights. Orion Thornton Independent Power Systems NABCEP Certified Solar PV Installer (Office) 406.587.5295 www.solarips.com
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
