Hi James, The SnapNrack Wide Seam Clamp will work with seams up to 0.82" wide. Will that work?
The SnapNrack folks say that a 1" seam will fit into the clamp, but the cam won't tighten down properly. I don't know if this drawing will make it through here, but here goes: [cid:[email protected]] If the drawing doesn't show up on this forum, I can send it to you in an email off-list. Brian Teitelbaum AEE Solar [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of James Reismiller Sent: Wednesday, August 08, 2012 1:48 PM To: [email protected] Subject: [RE-wrenches] Standing Seam Clamp for 1" wide seam? Hi Folks, Does anyone know of an S-5 or similar non-penetrating metal roofing clamp that will attach to a 1" wide standing seam? We normally use S-5-S, but these only accommodate ½" wide seams. Regards, James Reismiller NABCEP Certified Solar PV Installer® Abundant Solar 541-231-8772 CCB#175919 [cid:[email protected]] www.abundantsolar.com<http://www.abundantsolar.com/abundantsolar/Home.html> "I'd put my money on the sun and solar energy. What a source of power! I hope we don't have to wait until oil and coal run out before we tackle that."-Thomas Edison
<<inline: image002.png>>
<<inline: image003.png>>
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
