i get mine through vision metering (used to be austin international).
 
refurbished, and programmed for seperate buy & sell registers they are around 
$75.00 each.
 
[https://visionmetering.3dcartstores.com/Vision-Meter-Form-12S-120V-Class-200_p_211.html]
 
https://visionmetering.3dcartstores.com/Vision-Meter-Form-12S-120V-Class-200_p_211.html
 
todd
 
 
 
 
On Monday, August 20, 2012 6:39pm, "James Jarvis" <j...@aprsworld.com> said:



Hi Todd,

 Where does one actually buy KV2C meters? We have been looking for       the 
KV2C meters to use with the Modbus option, and nobody seems to       be able to 
supply them.

 Thanks,

 -James Jarvis
 APRS World, LLC

 On 8/20/2012 8:37 PM, [mailto:toddc...@finestplanet.com] 
toddc...@finestplanet.com wrote:
you will need two kv2c 'green           tag' meters... one for each 120 volt 
leg.
 
todd
 
 
 
On Monday, August 20, 2012           9:15am, "Hilton Dier III" 
[mailto:hiltond...@gmail.com] <hiltond...@gmail.com> said:


Hello Wrenches,

 Here's a metering conundrum for you.

 I have a client with a dual stacked Outback 3648 inverter             panel 
and a PV array. He has been off-grid for years, but he             is now going 
on-grid. He is getting the Outbacks rebuilt at             the factory to be 
grid tie compatible.

 As per our local requirements, he needs a meter to read just             the 
output of the inverter. The problem is that he has the             whole house 
on the inverters, not just a vital loads panel.             He wants to keep it 
that way. That gives him two separate             outputs, "AC Out" to the main 
breaker panel and "AC             In(teractive)" to the grid connection. If he 
just puts a             meter on the AC In line, he will lose track of the 
inverter             output that goes to power the house, and he'll get his     
        output reduced by any grid-based charging he does.

 There is a "green tag" method of wiring the meter to avoid             this, 
but it is designed for two single-leg 120VAC outputs             and the 
stacked Outbacks are putting out 240VAC on two legs.

 Aside from dropping $600 on an e-Gauge, is there any way to             get 
around this?

 Many thanks,

 Hilton

-- Hilton             Dier III             Renewable Energy Design             
Partner, Solar Gain LLC             453 East Hill Rd.             Middlesex, VT 
05602


 Sent from Finest Planet WebMail.

 

_______________________________________________List sponsored by Home Power 
magazineList Address: [mailto:RE-wrenches@lists.re-wrenches.org] 
re-wrenc...@lists.re-wrenches.orgOptions & 
settings:[http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org] 
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.orgList-Archive:
 [http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org] 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.orgList rules & 
etiquette:[http://www.re-wrenches.org/etiquette.htm] 
www.re-wrenches.org/etiquette.htmCheck out participant 
bios:[http://www.members.re-wrenches.org] www.members.re-wrenches.org




Sent from Finest Planet WebMail.
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to