Jason, If the pictures of the E18 & 19 are accurate, and from my conversations with the different suppliers that include SolarBridge inverters, several of these use the original Pantheon I instead of the updated Pantheon II model. Apparently there are differences in the locking clip in the module connectors and perhaps some problems with inverter data speed between the models. I think SolarBridge looks promising and one of the great advantages of micros is the fine resolution troubleshooting. In locating Enphase under an array, it makes sense to locate as many under as few modules as possible in the event of call backs..so you don't have to flip the card in the middle of the deck. With AC modules, the inverters is going to be evenly distributed under the whole array. So you are way more likely to be crawling out there to the middle.
Bill Dorsett Sunwrights Manhattan, KS From: [email protected] [mailto:[email protected]] On Behalf Of David Brearley Sent: Wednesday, September 26, 2012 6:16 PM To: RE-wrenches Subject: Re: [RE-wrenches] Enphase M210 Jason, You might also check out SunPower's ac modules: http://us.sunpowercorp.com/homes/products-services/solar-panels/AC-home-sola r-panel/ On Sep 26, 2012, at 5:49 PM, Sequoya Cross wrote: I haven't seen a full compatibility list on the new SMA-240US. At this point technical downloads aren't available and the data that is present on the website is still preliminary. I do have a contact who is beta-testing the units and will see if he has any more information or wants to comment. Thanks- Sequoya Cross Backwoods Solar From: [email protected] [mailto:[email protected]] On Behalf Of Jason Szumlanski Sent: Tuesday, September 25, 2012 4:50 AM To: RE-wrenches Subject: Re: [RE-wrenches] Enphase M210 Uh oh.... I guess that means no more SunPower E18/230 with Enphase. That sucks - it was a good premium product offering for us. Anyone know if the SMA or other microinverters are compatible with SunPower? Jason Szumlanski Fafco Solar On Mon, Sep 24, 2012 at 6:51 PM, Marco Mangelsdorf <[email protected]> wrote: Uh oh..I just learned that our Enphase friends are no longer making the M210s. I need (50) of 'em @ 240V. Anyone have any leads on that many, please? Please contact me off-list. Thanks, marco _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
