Wrenches, We typically run conduit for roof mounts over the edge of the roof to the eaves, rather than penetrate the roof whenever possible. An upcoming installation on an freshly asphalt shingled roof requires that we penetrate the roof for the conduit run (Enphase). I'm wondering if there are any suggestions for preferred flashing products and best known practices. It's always seemed to me that the typical Oatey type flashing dries and cracks eventually. Thanks for your insights.. Rich
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
