James:
We have put up a few of the MPM mounts and we too spent a lot of time
assembling. This was due to unfamiliarity and will not be an issue in the
future, making this rack a viable option for us.
The foundations required were substantial and expensive. I am hoping that
a system will be developed that can use driven pipe. Pipe driving
equipment is becoming more available and concrete is getting more expensive.
What took too much time was providing wire shielding. Our customers did
not elect to fence the arrays to comply with 690.31(A) so we built custom
wire guards from expanded aluminum. Ask if you want a photo or two.
I am really hoping some manufacturer will develop wire
shielding. According to the inspectors, locals are using chicken wire or
hardware cloth which I doubt is reliable or bonded.
William Miller
At 11:49 AM 12/19/2012, James Reismiller wrote:
Hi All,
We are looking for a faster, less expensive elevated ground mount
solution. Wondering what folks like for a 10 kW size array elevated to
8' above ground. We tried DP&W Multi-pole mount and spent a LOT of time
building the rack. We use Solarmount for low ground mounts, and are also
looking for something faster for that purpose as well. Thanks in advance!
Regards,
James Reismiller
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
