I find info about the AC soladeck in my distributors catalog, but I don't find any information about it on Soladeck's website.
On Wed, Jan 2, 2013 at 7:18 PM, Jesse Dahl <[email protected]> wrote: > Hello, > > I am in the process of installing a Enphase system that requires center > feeding the individual 15 modules circuits. I am wondering about wiring the > J-Box. I need to cut all of the boxes into the center of the runs of > Engauge cable and maintain the 6" of free conductor. To do this, I will > need to pull the trunk cable towards the J-Box. There are a few spots > where doing this may pull the inverter connection points to far from the > inverter. It looks like like the spots where this will be a problem is > where the circuit of modules is made up of modules from different > North-South rows of racking. I took some rough measurements at the end of > the day, but haven't really laid the cable out to check if it will really > be problem. > > I'm sure this is common, and easily fixed, but a conformation from another > installer would surely be welcome. > > Thanks, > > Jesse >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
