Haven't seen CreoTec yet but will look into it. I also like the fact that the curve on Iron Ridge makes them less prone to flexing and the spans can be longer. Thanks Eric. I'll let you know what I find.
Bill Dorsett Sunwrights Manhattan, KS From: [email protected] [mailto:[email protected]] On Behalf Of SunHarvest Sent: Friday, January 18, 2013 8:36 PM To: RE-wrenches Subject: Re: [RE-wrenches] Awkward Mid-clamps & jigs for installing or removingmodules? Bill, Have you looked at CreoTec? I personally like the Ironridge racking system much better than ProSolar or Unirac. I've seen plenty of demos with Creotec but haven't had the opportunity to use it yet. Looks very cool though and has some rave reviews. Eric Stikes SunHarvest ----- Original Message ----- From: William Dorsett <mailto:[email protected]> To: 'RE-wrenches' <mailto:[email protected]> Sent: Friday, January 18, 2013 9:35 AM Subject: [RE-wrenches] Awkward Mid-clamps & jigs for installing or removingmodules? Single-handed mounting for replacing or installing modules on racks. My helper installing an array on an Iron Ridge rack commented (like so many of you have surely thought) that the mid-clamps are really clumsy. His suggestion was that on his, he would lengthen the rail and only use end clamps so each module would be independently mounted, removed or the Enphase replaced. Of course this would apply to UniRack and other mid-clamps too. Can anyone recommend a jig for supporting the line of modules, while they are individually being clamped or unclamped? Perhaps a long length of Al angle braced back to the rail, so the bottoms of the modules can sit in a straight line while they are being clamped. Even a couple sliding Z-shaped spring hooks that can support the bottoms might work one module at a time as long as the rail is s Bill Dorsett Sunwrights 1715 Leavenworth Manhattan, KS 785/539-1956 Home/Office _____ _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
