Steve, Ryan:
I don't quite have line of sight. There is the brow of a hill... I will
look to see if any of the wireless solutions will handle this scenario.
Wm
At 12:57 PM 2/22/2013, Steve Jefferson wrote:
Content-Language: en-US
Content-Type: multipart/alternative;
boundary="_000_41FE255D65D554478C3B17F3EB5410EF5768618DSVRUSEXMBX01sma_"
There is a company called Digi.com. they make a wireless bridge for the
RS-485 protocol. Needs to be line of sight, but it will travel about 1000'.
They are familiar with installers using their radios to communicate with
our inverters, set up is pretty straight forward.
I am looking for a part number.
I have a couple of systems from my install days with these being used.
I like Ryan's solution as well.
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
