Amen. See millersolar.com for examples. 

William Miller

On Feb 26, 2013, at 10:49 AM, Ray Walters <[email protected]> wrote:

> HI Jeremy, Bob;
> 
> That's the little strap that would slice you open if you weren't careful.  
> That's a very hard box to work in just with one inverter.  My recommendation 
> would be to switch that box out for dual inverters.   Use Outback's Flex 500, 
> or Midnite's Notagutter. You're trying to save the customer a little money, 
> but the extra labor in trying to make that box work is just not worth it.  
> Its really  You'll end up adding an aux load center for something, and as 
> you're already discovering, that box used breaker configurations that are 
> becoming obsolete.
> Upgrade it now or upgrade it later, but I would stop the suffering right now.
> R.Ray Walters
> CTO, Solarray, Inc
> Nabcep Certified, Licensed Contractor
> 808 269-7491
> On 2/25/2013 5:37 PM, bob ellison wrote:
>> They are still available in several configurations (hook up styles)
>> The DC 175/250 had a hold down strap instead of bolting to a               
>> panel. 
>> Back to searching email.
>> Later,
>> Bob Ellison
>>  
>>  
>>  
>> From: [email protected] 
>> [mailto:[email protected]] On Behalf Of Jason 
>> Szumlanski
>> Sent: Monday, February 25, 2013 7:11 PM
>> To: RE-wrenches
>> Subject: Re: [RE-wrenches] GJ series breakers 250A 250vdc
>>  
>> I think you can still buy the DC250, so I assume the breakers are out there. 
>> You might look at the Midnite E-Panels. They may use the same or compatible 
>> DC breakers.
>> 
>> 
>> Jason Szumlanski Vice President, Fafco Solar
>> Tel: 239-574-1500
>> [email protected] | http://FafcoSolar.com
>> 
>>  
>> 
>> On Mon, Feb 25, 2013 at 1:23 PM, All Solar, Inc. <[email protected]> 
>> wrote:
>> Wrenches,
>> Anyone know if the old DC250 breakers are still available?  I see they are a 
>> GJ series Heinemann.
>> Going to be insatalling a 2nd SW for a client. He has the DC250 enclosure, 
>> so I was hoping to install it there. I guess I would need the mounting clips 
>> to hold it to the backplate. Wierd since it's a panel mount breaker.
>>  
>> Regards,
>> Jeremy
>>  
>> All Solar, Inc.
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: [email protected]
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
>> 
>>  
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2899 / Virus Database: 2641/6130 - Release Date: 02/25/13
>> 
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: [email protected]
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: [email protected]
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to