benn and interested others,
Just a side note due to benn's comment about cold water on a hot panel
possibly resulting in cracked glass.
My 45 degree tilt, roof mounted shop array (5KW, Solarworlds) gets
covered with snow in the winter at times...when I need the power the most
(off-grid). Even at that tilt, there are times when it takes a few days to
slide. I have a 50 Gal tank of hot water in the shop heated from the woodstove
often that time of year. The temptation was great, should I do it??
I just happen to have a failed Kyocera 80-85W mod so I covered it with
a foot of snow, air temp at about 15 degrees F, connected the hose to my hot
water supply bib, turned on the too-hot-to-touch hot water (got it running hot
off to the side of the mod first) and when the water started to steam I pointed
it at the snow covered module from about 4 feet. It took about 1-2 seconds for
that hot water to penetrate the snow and hit the glass...I spiraled out from
that point until most of the snow was gone. Result: glass AOK.
Yes, I then proceeded to clear my entire array of snow to collect many
ground-covered-snow-reflected KWhrs that day. The array looks fine. My only
concern since, has been maybe having compromised the frame/glass interface/seal
in some way that may not show any visual impact, yet. Though it was a
different scenario in that I was squirting hot water from the ground below the
array resulting in a pretty diffuse spray with virtually no force to it by the
time it reached it's target.
Jeez, the things we do for a winter off-grid KW.
Bill
Feather River Solar Electric
----- Original Message -----
From: Benn Kilburn - DayStar Renewable Energy
To: RE-wrenches
Sent: Thursday, April 18, 2013 10:05 AM
Subject: Re: [RE-wrenches] Cleaning Modules
Corey,
If rain water isn't doing good enough, which it usually does depending on
angle and other factors...
-pick up a window washing squeegee (like at a gas station) that you can add a
longer, maybe telescopic handle. That works great.
-Just use water, it works fine. There is no need for additional chemicals or
cleaners. If bird crap or dirt is particularly stubborn just wet it, scrub it,
wet it again and let it soak a few minutes, then it should wipe right off.
Keep in mind most module mfgrs recommend nothing more than a mild detergent
added to water (read the specific module instructions).
-Be wary of temp differences between water and module glass. Cold water on
hot glass can cause the glass to crack. Best to wash in the morning before the
glass heats up.
I've seen a few module washing products (automatic sprayers) advertised, but
have no first hand experience with any.
Good luck,
benn
From: Corey Shalanski <[email protected]>
Reply-To: RE-wrenches <[email protected]>
Date: Wednesday, April 17, 2013 7:20 PM
To: RE-wrenches <[email protected]>
Subject: [RE-wrenches] Cleaning Modules
Greetings Wrenches,
I am wondering if anyone can offer tried-and-true tips for cleaning
modules: tools, materials, methods?
--
Corey Shalanski
Joule Energy
New Orleans, LA
_______________________________________________ List sponsored by Home
Power magazine List Address: [email protected] Change email
address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules &
etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios:
www.members.re-wrenches.org
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
