Wrenches,
I have been asked to repair a Grundfos SQ installation for our area
Land Trust. Pump is not pumping and the controller (CU200) is throwing a code
of: F3. The manual says loose wires, bad connection, failed CU200 or failed
pump. I'm looking for more experience than mine in these matters before I
drive the 3 hour round trip out there for the repair for: most likely issues,
tests to conduct, tools, spare parts (controller??)......
Thanks in advance,
Bill Battagin
Feather River Solar Electric
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849 / 6544 fax
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
