We just serviced an old SnapnRack install, and we found the usual: most
of the mounts had been over torqued and the SS bolts had spalled. With
a bottle of anti-seize and a torque wrench we replaced the damaged
hardware and all went well.
I like the end clamp that grabs the module from underneath, and I agree
with Daryl about using the open rails for wire management. Unfortunately
we don't have a local supplier for SnapNRack, and when I contacted them
directly, they never returned my call.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 5/31/2013 7:44 PM, penobscotso...@midmaine.com wrote:
It is my favorite. My crew said they would mutiny if I changed back to
others we have used. Wire management is simplified due to a large channel,
spacing of L feet can be up to 6 feet on a 12 pitch roof. We have tried
many manufacturers and this is all we have been using for the last three
years.
Daryl
Hello Wrenches,
How would you rate the SnapNrack mounting systems against Unirac and
other mounting systems?
Thanks,
Drake
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
