On 6/8/2013 3:10 PM, Ray Walters wrote:
I'm building a small power control board this weekend, and I have a
stupid question:
Can Midnite Temp Sensors be used with Trace C40s?
They DO plug in.
I recall that Outbacks were not compatible.
Thanks as always,
I remember the Trace temp sensors as being 100 K Ohms.
The Outback and Midnite sensors are both 10K so ~should~ be fairly
compatible
with each other. Trace would not be compatible with MN or OB though.
boB
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
