I have a project using an SW4024 inverter that uses the generator
support mode with a smaller hydro AC generator. Worked well, but one of the
to inverters died. There are plenty of new SWs on the internet, but all the new
ones are SW4024MC2. Apparently the SELL mode does not exist in the MC2
version and Auto Gen Start is an option. Does anyone know if the good old
generator support is available in the MC2 version, or has it been scrapped
along with the SELL mode.
Generator support mode--where some inverter AC output can be added to
the generator AC input to meet a load larger than the generator could otherwise
handle. Not just where the inverter backs off the battery charger enough to
use full generator input for the load.
Any insight on the MC2 version would be helpful.
Lee Tavenner
Solar Plexus
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
