I concur with both Mike and Richard here: keep the rails because it should look better than all silver; or if the customer insists, change the rails out, and get tough with your supplier that duffed the order.
Either way you won't have some nightmare paint peeling in a year call back.
If the customer is reasonable, you probably don't have to do anything; explain that dark anodized rails actually cost more.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 7/5/2013 4:06 PM, Mike & Jessica Nelson wrote:
Wreches,
I've tried to paint clear anodized unirac solarmount rail with paint, spray on bedliner, etc. It always comes off after a few months. I say leave it, or swap it out.

Mike Nelson
MD Electric & Solar, Inc.

On Fri, Jul 5, 2013 at 2:08 PM, Richard L Ratico <[email protected] <mailto:[email protected]>> wrote:

    Hi Benn,

    No images but the ones in my imagination. The majority of arrays
    are viewed at
    some distance, as in waaaaay up there on the roof. Most roofing
    materials are
    dark colors. There's a good chance the few parts of the rails that
    are visible
    at all, are less so than if they were silver. When given lemons,
    make lemonade.
    This may become a look you come to like.

    Dick Ratico
    Solarwind Electric


    --- You wrote:
    I've suggested leaving the rails black with silver-framed mods.
    They are
    considering it.
    It certainly looks better than black-framed mods w/ silver rails.

    Can anyone share a few install photos with me with black rails and
    silver-framed
    mods, so I can show the client that it doesn't look that bad.

    Thanks

    benn
    Sent from a 'smart' phone, with touch screen keys. Please excuse
    shortcuts and
    typos.

    On 2013-07-05, at 9:30 AM, August Goers <[email protected]
    <mailto:[email protected]>> wrote:

    > Hi Benn,
    >
    > This sounds tricky. We've occasionally painted silver rail black
    on the
    > ends with Rust-Oleum matte black paint. It always seems to
    adhere well but
    > I don't know for sure how long it will last. I've never tried
    painting
    > silver over black.
    >
    > Is the client unhappy with black rail and silver modules? As long as
    > you're consistent with the type of rail maybe you can talk them into
    > leaving it?
    >
    >
    > Best,
    >
    > August
    >
    > -----Original Message-----
    > From: [email protected]
    <mailto:[email protected]>
    > [mailto:[email protected]
    <mailto:[email protected]>] On Behalf Of
    Benn At
    > DayStarSolar
    > Sent: Thursday, July 04, 2013 6:29 PM
    > To: RE-wrenches
    > Subject: [RE-wrenches] Painting rails
    >
    > Anyone successfully/properly painted silver/anodized rails to
    black, or
    > black rails to silver to match module frames?
    >
    > We have a large project and the supplier hiccup'd the order (if
    you can
    > believe it). The black rails are already installed and silver framed
    > modules are what arrived.
    >
    > One of the options being considered is painting the visible
    black rail
    > portions to silver.
    > Are there any known, tried and true methods/products for doing
    this so
    > that the paint will last?
    >
    > Reluctantly,
    > benn
    > Sent from a 'smart' phone, with touch screen keys. Please excuse
    shortcuts
    > and typos.
    > ___________________
    --- end of quote ---
    _______________________________________________
    List sponsored by Home Power magazine

    List Address: [email protected]
    <mailto:[email protected]>

    Change email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    List-Archive:
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    www.re-wrenches.org/etiquette.htm
    <http://www.re-wrenches.org/etiquette.htm>

    Check out participant bios:
    www.members.re-wrenches.org <http://www.members.re-wrenches.org>




--
Michael & Jessica Nelson
MD Electric & Solar Inc.
Office: 707-884-1862
Cell: 707-684-0064


_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to