Jay –

 

I’ve done this before with the Kohler RES series to eliminate the phantom in 
auto-mode, BUT stressing to all that the generator could start automatically 
without notice – especially to the generator tech. As always, best to 
disconnect the starting battery when servicing. 

 

Kirk Herander

VT Solar, LLC

dba Vermont Solar Engineering

NABCEPTM Certified Inaugural Certificant

NYSERDA-eligible Installer

VT RE Incentive Program Partner

802.863.1202

 

From: [email protected] 
[mailto:[email protected]] On Behalf Of jay peltz
Sent: Sunday, July 07, 2013 9:58 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Generac Ecogen (was RE: generator suggestions)

 

Hi Kirk 

 

One trick I learned from my generator guy is to hook up the remote start to the 
manual on position

This bypass's the auto position and the extra load on the battery

 

Best I can tell only difference on the Koehler anyway is how fast it starts. On 
auto right now

On manual a few seconds delay. 

 

Jay

 

Peltz power

Sent from my iPad


On Jul 6, 2013, at 10:46 AM, "Kirk Herander" <[email protected]> wrote:

Alan and others,

 

I have an off-grid customer looking at the Ecogen. Now that 6 months have 
passed since your comments, can you tell us more of the pros and cons of this 
unit? 

I read somewhere the phantom load of the controller (and charger?) is 20 to 50 
watts total. Is it just the controller which needs to stay awake? Is there a 
separate charger for the battery, meaning no alternator / rectifier direct from 
the engine? Regardless,  it seems dumb to me that a generator designed for 
off-grid would mandate a phantom load to operate. For that reason, it seems no 
more appealing than the Kohler R series. Is there an on-board hour-meter? 
Thanks. The brochure does not address these questions.

 

Kirk Herander

VT Solar, LLC

dba Vermont Solar Engineering

NABCEPTM Certified Inaugural Certificant

NYSERDA-eligible Installer

VT RE Incentive Program Partner

802.863.1202

 

From: [email protected] 
[mailto:[email protected]] On Behalf Of Allan Sindelar
Sent: Wednesday, January 30, 2013 3:21 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] generator suggestions

 

Ray,
Everything has changed. The Kohler 6.5RMY and the Onan 6.5 Commercial were 
wonderful units, but also both flathead twins, eventually discontinued for 
efficiency and emissions reasons, as I came to understand. Also, the American 
residential market was (and remains) almost exclusively about home standby, not 
off grid, and the major manufacturers went in that direction. Home standby is a 
competitive market, and generators aren't expected to run for many hours over 
their useful life, so internals can be cheapened and features to make them more 
like a home appliance are added. Many of us have customer horror stories about 
home standby units used off grid.

I have written favorably about the Generac EcoGen here and in Home Power, as 
it's pretty much currently the only under-10K unit designed for off grid use. I 
have now had two at my home - we had a fire in May that took out an outbuilding 
and the gennie, and I replaced it with the same model, because it had performed 
well and there was nothing else to compete with it. Always starts, minimal 
maintenance, exceeds its rated output on occasion, doesn't require a separate 
enclosure, and is sealed against mice. Oh, and very quiet. So far the only 
disadvantage is the need for either an AC feed for the 8W phantom load to keep 
the controller awake, but a PV module and small controller on the starting 
battery will handle that one of these days. It's not just one of their standard 
units with different bells and whistles, but has hardened valves, lower (2,500) 
rpm, longer maintenance intervals, and other reliability features.

I know all about Generac's otherwise-poor reputation, and am willing to stick 
my neck out about this model, as I think it's the best we currently have in 
this size range. My understanding is that the Propane Reliability Council (or 
some similar organizational name) was involved with sponsoring development of 
an LP gennie tough enough to handle off grid demands. They first approached 
Kohler, who turned them down, and then worked with Generac (all this is 
hearsay; don't quote me on it).
Allan

Allan Sindelar
 <mailto:[email protected]> [email protected]
NABCEP Certified Photovoltaic Installer
NABCEP Certified Technical Sales Professional
New Mexico EE98J Journeyman Electrician
Founder and Chief Technology Officer
Positive Energy, Inc.
3209 Richards Lane (note new address)
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com <http://www.positiveenergysolar.com/>  

 

 

On 1/30/2013 10:41 AM, Ray Walters wrote:

Hi Randy and all;

I definitely like the water cooled 1800 rpm machines too, but for regular off 
grid homes, they just are way out of the budget.  We jumped on the inverter 
generator band wagon for a while, but had the same load issues Allan described. 
 (Microwave kicks the breaker, and you're running the genny for hours for 
nothing)  Many customers have turned to the contractor portables with equally 
disappointing results, but often they already have the genny, and we just 
provide an inlet box and cord.  
The Generac looks like a good idea, I wish Onan or Kohler would build one. 
Kohler used to make a 6.5 Kw that fit the one inverter household fairly well.

Ray Walters

THeOn 1/30/2013 8:55 AM, Larry Crutcher, Starlight Solar Power Systems wrote:

Randy,  

 

I concur, the Cummins/Onan generators are built well and are reliable. They 
provide a 1 year, 1000 hour warranty for off grid use when a RE system is 
installed for primary power. 

 

We install lots of Magnum Energy inverters with AGS modules in RV's. What sold 
me on the Onan's is having seen many RV generators (3600, 2880 and 2400 RPM), 
some with several thousand hours, still operating with tight frequency and 
voltage control, no leaks, easy starting, etc.


Larry Crutcher

Starlight Solar Power Systems

 







 

On Jan 30, 2013, at 7:52 AM, Randy Brooks wrote:

 

Todd, 

 

We don't sell or install generators, but the only one I recommend for permanent 
installations is the Cummins/Onan, 1,800 rpm, propane fueled.  All others have 
failed early.

 

Good luck,

 

Randy Brooks

Brooks Solar, Inc.

Solar Power for People

140 Columbia View

Chelan, WA  98816

509-682-9646

[email protected]

www.BrooksSolar.com <http://www.BrooksSolar.com/> 








_______________________________________________
List sponsored by Home Power magazine
 
List Address: [email protected]
 
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
 
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
 
Check out participant bios:
www.members.re-wrenches.org
 

 

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to