I think that is a GL5E style relay.  See if this looks like it.

http://www.mouser.com/catalog/catalogusd/646/1944.pdf

Omron among others make this.

I would suggest calling Craig for any Trace inverter fixes and questions...

http://www.phantompowerservices.com/


boB


On 8/4/2013 3:29 PM, Mac Lewis wrote:
Hi William & others,

I was curious if you had any luck repairing Relay 8 on the SW4024 for this customer. I have a customer who apparently has a bad Relay 7 (or the board is bad), and I am considering trying to pull one of the others off to replace it. He just needs a two-wire start. I haven't found a way to program around this. Any advice on this?

Thanks


On Thu, Jul 25, 2013 at 7:45 AM, <[email protected] <mailto:[email protected]>> wrote:


    Hi Bill,
    SW is repaired at a board level. An ASC may attempt component
    level repair, but they wouldn't be
    able to get the components from Xantrex/Schneider Electric.
    Chris at Tekris Power in Farmingdale, NJ has been known to perform
    component level repair on
    certain discontinued models.
    Give him a call if you want : 732-938-4996 <tel:732-938-4996>
    Rgds,

    
_____________________________________________________________________________________
    *
    Eric Bentsen*  | *Schneider Electric **  |  Solar Business*  |
    *UNITED STATES*  | *Technical Support Representative* *
    Phone:* +(650) 351-8237 ext. 001#  | *
    Email:* [email protected]_
    <mailto:[email protected]> |
    *Site:*_www.schneider-electric.com/solar_
    <http://www.schneider-electric.com/solar> | *Address:* 250 South
    Vasco Rd., Livermore, CA 94551
    _
    _<http://www.schneider-electric.com/solar>
    *** Please consider the environment before printing this e-mail



    From:       Bill Loesch <[email protected]
    <mailto:[email protected]>>
    To:         RE-wrenches <[email protected]
    <mailto:[email protected]>>
    Date:       07/25/2013 05:01 AM
    Subject:    Re: [RE-wrenches] SW4024 RY8
    Sent by:    [email protected]
    <mailto:[email protected]>


    ------------------------------------------------------------------------




    Hi Eric,

    Are you aware of any of your Authorized Inverter Repair Facilities
    that are doing component level replacement on pricey or even
    discontinued boards?

    TIA,
    Bill Loesch
    Solar 1 - Saint Louis Solar
    314 631 1094 <tel:314%20631%201094>
    On 24-Jul-13 8:04 PM, [email protected]_
    <mailto:[email protected]>wrote:

    Hi William,
    If RY8 has a bad coil or contact, you can use one of the AUX
    relays (assuming they are not being used for something else).
    If the signal is not being sent, it is more likely a control board
    issue. Boards are still available for the SW series, but they are
    pricey.
    Rgds,
    
_____________________________________________________________________________________*

    Eric Bentsen*  | *Schneider Electric **  |  Solar Business*  |
    *UNITED STATES*  | *Technical Support Representative* *
    Phone:* +(650) 351-8237 ext. 001#  | *
    Email:* [email protected]_
    <mailto:[email protected]> |
    *Site:*_www.schneider-electric.com/solar_
    <http://www.schneider-electric.com/solar> | *Address:* 250 South
    Vasco Rd., Livermore, CA 94551 _
    __
    _<http://www.schneider-electric.com/solar>
    *** Please consider the environment before printing this e-mail


    From:       "William Miller" _<[email protected]>_
    <mailto:[email protected]>
    To: "RE-wrenches" _<[email protected]>_
    <mailto:[email protected]>
    Date:       07/24/2013 04:20 PM
    Subject:    [RE-wrenches] SW4024 RY8
    Sent by:    [email protected]_
    <mailto:[email protected]>



    ------------------------------------------------------------------------



    Friends:

    Thanks to all of you for recent advise on a Tristar charge controller.

    New subject:  I have an SW4024 with a defective relay 8.  Do any
    of you know the part number for a replacement relay?  Anyone
    replaced one of these before?  Advice?

    Thanks in advance,

    William Miller




    17395 Oak Rd. Atascadero, CA 93422_
    __www.millersolar.com_ <http://www.millersolar.com/>
    805-438-5600 <tel:805-438-5600> voice*
    *Note: above number replaces cell number


    ______________________________________________________________________
    This email has been scanned by the Symantec Email Security.cloud
    service.
    
_____________________________________________________________________________________________________________________
    List sponsored by Home Power magazine

    List Address: [email protected]_
    <mailto:[email protected]>

    Change email address & settings:_
    __http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org_

    List-Archive:
    _http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org_

    List rules & etiquette:_
    __www.re-wrenches.org/etiquette.htm_
    <http://www.re-wrenches.org/etiquette.htm>

    Check out participant bios:_
    __www.members.re-wrenches.org_ <http://www.members.re-wrenches.org>





    _______________________________________________
    List sponsored by Home Power magazine

    List Address: [email protected]_
    <mailto:[email protected]>

    Change email address & settings:
    _http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org_

    List-Archive:
    _http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org_

    List rules & etiquette:
    _www.re-wrenches.org/etiquette.htm_
    <http://www.re-wrenches.org/etiquette.htm>

    Check out participant bios:
    _www.members.re-wrenches.org_ <http://www.members.re-wrenches.org/>



    No virus found in this message.
    Checked by AVG - _www.avg.com_ <http://www.avg.com/>
    Version: 2013.0.3349 / Virus Database: 3209/6518 - Release Date:
    07/24/13

    No virus found in this message.
    Checked by AVG - _www.avg.com_ <http://www.avg.com/>

    Version: 2013.0.3349 / Virus Database: 3209/6518 - Release Date:
    07/24/13_______________________________________________

    List sponsored by Home Power magazine

    List Address: [email protected]
    <mailto:[email protected]>

    Change email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    List-Archive:
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    www.re-wrenches.org/etiquette.htm
    <http://www.re-wrenches.org/etiquette.htm>

    Check out participant bios:
    www.members.re-wrenches.org <http://www.members.re-wrenches.org>


    _______________________________________________
    List sponsored by Home Power magazine

    List Address: [email protected]
    <mailto:[email protected]>

    Change email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    List-Archive:
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    www.re-wrenches.org/etiquette.htm
    <http://www.re-wrenches.org/etiquette.htm>

    Check out participant bios:
    www.members.re-wrenches.org <http://www.members.re-wrenches.org>





--



Mac Lewis

*

"Yo solo sé que no sé nada." -Sócrates

*


_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to