Hi Benn, It's around 200W per square meter.
Blessings, Kelly Kelly Larson Electrical Engineer NABCEP Certified Solar PV Installation Professional ISPQ Master Trainer CA Electrical Contractor# 868189 SolarKelly.com On Sep 5, 2013, at 9:06 AM, Benn At DayStarSolar wrote: > Wrenches, > I was asked... What is the minimum Lux level required to make usable > electricity with a commonly installed monocrystaline PV module. > > The question is for the purpose of designing a tracker that will not operate > until a particular threshold is reached. > Thanks, > benn > Sent from a 'smart' phone, with touch screen keys. Please excuse shortcuts > and typos. > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
