Allan, According to Wikipedia, it is not a typo. It is, however, an excellent example of lousy technical writing / documentation. You are correct to zero in on it
What Outback seems to have done, is switch from a four line drawing on the input side of the circuit to a one line drawing on the output. Bad. And, it was a confusing drawing to begin with. However, I think "120VAC to Neutral" was correctly meant to mean, as measured from that point to the neutral bar. Your proposed "120VAC output to Inverter" is much better. Allow me to digress point out, most consumers, homeowners, tradesmen, and engineers only read the owners manuals when forced to. One reason, perhaps, the manuals, more often than not, suck. A pet peeve of mine. Great documentation takes time and talent. Both cost real money. I agree. Your solution works. It really is that simple. Dick Ratico Solarwind Electric _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
