Carl, there are actually 2 (two) Sunny Island AC load output breakers.
One set is in the AC input-output bypass switch and the other are
separate breakers so you can turn off the inverter output.
The Sunny Boy outputs also go through a 2-pole circuit breaker.
What OCPD are you referring to ?
boB
On 9/16/2013 12:31 PM, Carl Adams wrote:
Hello Wrenches,
We are installing our first Midnite Solar E-panel for SMA. The epanel
has a bus bar for landing the inverter output circuits. The attached
diagram from Midnite does not include any OCPD in the circuit, but it
seems to me these will be required . We'll be installing an SMA
SB3000TL and SB5000TL. Have any of you installed this SMA E-Panel
configuration before and if so how did you handle this piece of it?
Thanks in Advance
Carl Adams
SunRock Solar
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
