Hi Kris, The roofing contractor we work with for EDPM can get different boot types, or can get custom boots made for our standoffs. I assume you mean heat-welded boots. 4" Unirac 2 piece aluminum standoffs haven't been a problem. Maybe you need to shop around for a roofer who can get more variety of options for you.
Bruce Erickson Mendocino Solar Service PO Box 1252 Mendocino, CA 95460 707-937-1701 707-937-1741 fax br...@mendocinosolar.com On Oct 1, 2013, at 8:49 AM, Kristopher Schmid wrote: > Hi wrenches, > > I am looking to flash a 1" diameter snapnrack post on a pitched roof covered > with black epdm membrane. The roofing manufacturer has a one size fits all, > but its too tall to work well. Any suggestions would be much appreciated. > > Thanks, > Kris > > ---------- > Shine On! > > Kris Schmid > Legacy Solar, LLC > 864 Clam Falls Trail > Frederic, WI 54837 > 715-653-4295 > www.legacysolar.com > NABCEP Certified PV Installer > Licenced Wisconsin Master Electrician > BSEE > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org