Hi wrenches, I have some folks that I'm meeting in a couple of days that have 4 Trace SW 5048 inverters. It's a very large, older compound-style installation that the original installer has bailed on. They have it set up so that there is a common battery bank and each pair of series stacked inverters are independently feeding 2 separate 120/240 busses. One of these 120/240 services gets utilized very heavily, and one isn't really used at all. Is it possible with this type of inverter, to have all four inverters feeding a common AC bus, two feed Phase A and the other two feeding phase B?
I know that is possible to series stack and to parallel stack this inverter, but can you do both at the same time? If so, does anyone have a pin out to a parallel stacking cable? Thanks in advance -- Mac Lewis * "Yo solo sé que no sé nada." -Sócrates *
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
