We use this product for SF9300's:LSDSGU-9. # 10 / 2 conductor used mainly in military applications. https://www.anixter.com/north-america/ca/en/product-detail.LSDSGU-9.html It's available special order through lots of wire suppliers. Never had good success getting flat tray cable to seal and stay sealed for the long haul. Haven't had issues with this wire and a few dozen installs out there. Kevin
-----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Allan Sindelar Sent: February 28, 2014 4:55 PM To: RE-wrenches Subject: [RE-wrenches] Source for wire Wrenches, Simple request, please: who carries 10/2 jacketed submersible cable, specifically to use with the Shurflo 9300 pump? Conventional pump suppliers don't carry it, as any pump with metal parts needs a third conductor for ground, and usually run 240V. The 9300 fits only 10/2 or 12/2 wire without ground and with flat jacketing. It must be flat-jacketed to seal to the cable gland. Thank you, Allan -- Allan Sindelar <mailto:[email protected]> [email protected] NABCEP Certified PV Installation Professional NABCEP Certified Technical Sales Professional New Mexico EE98J Journeyman Electrician Founder, Positive Energy, Inc. A Certified B CorporationTM 3209 Richards Lane Santa Fe, New Mexico 87507 505 424-1112 office 780-2738 cell <http://www.positiveenergysolar.com/> www.positiveenergysolar.com
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
