Yes, absolutely on the German ! BTW, I went to Munich last June for
R&R and the Intersolar show... Loved it there !
Our little comm box interfaces the SMA / Sunny Island's CAN bus to the
Classic's
modbus over RS232 network phone jack connections and interprets theirs to
ours, just like it was one of their own controllers and tells the
Classics what
voltage to be charging to.
The Sunny Island uses its own shunt and temp-comp, etc. for all of that.
The Classic's Ethernet is still active so Local app (etc.) is still active.
>>>>This sounds like once again Midnite is solving my problems<<<<
Yep.... Solving problems as fast as we make them !
boB
On 3/26/2014 2:43 PM, Ray Walters wrote:
Hi Bob;
This sounds like once again Midnite is solving my problems, before I
even know I have them. Can your interface work directly with the SI,
or does it require the Sunny Web box, too?
Also, is Midnite's Whizbang Jr. shunt sensing usable in this, or do
you just defer to the SI's current sensing?
Does Midnite's local app or web app still work, or change any?
(I guess you guys had to learn German to keep the marriage happy.....)
R.Ray Walters
On 3/25/2014 10:46 PM, [email protected] wrote:
Next week you should be able to order our SMA Communications Adapter
(approximately $175) that lets the Sunny Island take over the
Classic's charging... Up to four Classics per S.I. This leaves all
of the control up to the S.I. and its charging smarts.
We've been working on this interface quite a while now and it's
finally ready. I thought it was up on our web site but I do not
see it there yet.
boB
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
