Ben:

 

I hope you installed a dedicated sub-panel to connect the inverters and Envoy.  
If so, find a filter to insert on the feeder to the sub-panel.  Digi-key has 
some models.  Install the filter and you should be resolved.

 

Enphase tech support can scan the bandwidth to detect interference and advise.  
They have been pretty helpful.  Good luck.

 

William

 

 

Gradient Cap_mini
Lic 773985
millersolar.com <http://www.millersolar.com/> 
805-438-5600

 

From: [email protected] 
[mailto:[email protected]] On Behalf Of Benn Kilburn
Sent: Monday, April 14, 2014 9:08 AM
To: RE-wrenches
Subject: [RE-wrenches] Enphase monitoring picking up other systems

 

Wrenches,

I'm sure i read a thread on this list about dealing with this, i've searched 
but cannot find it.  If anyone recalls the subject line, please let me know.

 

We are dealing with setting up Enphase monitoring in neighborhoods with other 
Enphase systems nearby and these 'other' systems are being picked up by the EMU.

 

A few weeks ago we finished a 14 module (3.5kW) install and i plugged in the 
EMU to search for the inverters.  As it was picking up the first few inverters, 
it was showing several hundred kWh already produced???  Not bad for a 14 module 
system being in operation for 10 min!!!  (yes the inverters were new, out of 
the box)

 

After 30-40 min, the EMU had picked up 28 inverters in total.  There were 14 on 
the system we had just installed, and 14 on a house across the street that we 
had installed back in Nov'13.  I'm pretty sure it had picked up the 14 across 
the street before picking up the ones we just installed.
Funny that we can sometimes have communication issues btwn the inverters and 
EMU in some houses, and here we have EMU's picking up inverters across the 
street!?!

 

Anywho... has anyone dealt with this and streamlined a process with Enphase to 
remedy this issue?

 

Cheers,

Benn

<<image003.jpg>>

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to