This may apply to the other string on using photos, etc. but I hereby
grant full rights to all registered users of the wrenches list to use
any of my posted photos for educational purposes.
I was trying to figure out the DC wiring myself. Its possible there is
a homemade bussbar connected between the 2 inverters. Look close and
tell me what you think.
A customer sent that pic to me, so I have not been there to see it in
person.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 4/29/2014 10:33 AM, Jason Lerner wrote:
Hello Ray,
I teach a 4 day class for Outback, mostly for installers and distributers.
Could I use that picture you just posted on the Wrenches list, with
credit to you (or not) as an example of how to not hook them up? I
mention in the class how although it is possible to hook up a Radian
without a GSLC, it usually turns out like that photo....
Also what are those things next to the hole saw on the upper left of
the photo? Are they capacitors? And lastly do they have black for
the + and - inverter cables on one inverter and red for + and - on the
other??
Thanks much,
Jason Lerner
Waldron Power and Light Co.
(888) wapalco
(888) 927-2526 Office phone
(360) 588-6194 Home phone
(360) 632-2085 Sometimes cell - most of the time not
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
