I have installed an Outback GTFX3048 inverter with a 250Ah battery system. The intent of the system is to isolate and backup a sub panel in the house and to export excess power which will be used in the main panel loads or go back to the grid. The inverter should not charge the batteries from the grid and should power the loads from the grid at a battery setpoint to avoid any deep discharge. I find the documentation confusing on the best way to do this and we have had some issues with getting this to work smoothly. Can anyone offer the best settings for this application or experience with it?
-- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
