We have used Windex and a pressure washer, Windex seams to work well hope its not etching primer that might be hard to get off but that's mainly used on gutters and down spouts not wood Jerry On Jun 4, 2014 10:31 AM, "Louis Woofenden" <[email protected]> wrote:
> > Hi Wrenches, > > We have an existing customer who just had their house repainted, and the > painter oversprayed significantly on a row of modules. I haven't run into > this particular problem before, and am at a bit of a loss about what to > recommend to our customer for cleaning up this mess. > > Anyone have recommendations of cleaning products or techniques to use that > won't damage the AR coatings or anything else on the module, yet will > remove paint? Or for that matter, what to avoid? > > Thanks, > > Louis Woofenden > > Net Zero Solar > Tucson, AZ > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/[email protected]. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
