The Franklin SolarPak uses a standard AC motor and pump down hole, and a
special inverter/ controller above ground for array direct operation.
The pump is 3 phase though. You didn't mention phase, but I'm guessing
yours is not 3 phase.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 6/17/2014 4:32 PM, Jeff Oldham wrote:
Anyone know of a way to power an AC 230V pump PV direct?
AeroVironment's USPC-5000/2000 are no longer made. No, a DC pump will
not fulfill this need.
Thanks
From the Solar, Wind and Hydro powered office of Jeff
Oldham/Regenerative SOLutions
____________________________________________________________
Fast, Secure, NetZero 4G Mobile Broadband. Try it.
<http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2>
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
