Friends:
Excuse the flurry of posts here, but I've got a lot of varied projects currently, creating a lot of questions. I came upon a 200 amp main breaker feeding two sub-panels. The installer had put 3/0 and #1 under each lug to feed a 200 amp panel another sub-panel with a 100 amp main. Obviously this is wrong in at least two regards. What is the correct method to feed two 200 amp sub-panels from one main. Can you tap the output leads of the main breaker to feed 2 200 amp panels as long as the wire is sized correctly and the connector is listed? In my 35 years I have never come upon this scenario. Thanks everyone. I really appreciate your sage advice. William Miller Gradient Cap_mini Lic 773985 millersolar.com <http://www.millersolar.com/> 805-438-5600
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
