I got .0437" for RHH-2 with outer jacket in the 2011 code -------- Original Message -------- Subject: [RE-wrenches] Pv wire From: "Kirk" <[email protected]> Date: Thu, June 26, 2014 1:15 pm To: "RE-wrenches" <[email protected]>
Hi folks, What is the proper approximate in2 area to use for #10 1kva/2kva pv wire for calculating conduit fill? I'm on a job site and don't have the specs with me. Thanks. Kirk Herander VSE _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
