Related question: How should we treat circuits that are less than 250V? Does the EMT need to be bonded at EITHER end?
Some of our local inspectors are requiring bonding around all concentric/eccentric knockouts, regardless of circuit voltage. -- Corey Shalanski Joule Energy New Orleans, LA ᐧ On Tue, Jul 15, 2014 at 12:45 PM, <[email protected] > wrote: > > Message: 3 > Date: Mon, 14 Jul 2014 15:11:44 -0700 > From: William Miller <[email protected]> > To: RE-wrenches <[email protected]> > Subject: [RE-wrenches] Concentrics at 250 volts plus > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > Friends: > > Please help us settle a crew debate before we come to blows: for circuits > 250 volts and higher, do we need to bond EMT at both ends? Or, if there is > bonded cabinet with a concentric on one end and a solid, bonded metal > cabinet on the other, do we need a bonding bushing on the concentric end? > > I say a conduit needs to be bonded only on one end. My misguided employee > says both ends. Both cabinets are independently bonded. > > Thanks in advance. > > William > Miller Solar >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
