At the community college I teach at we hooked an old M-190 micro to a bergy 1kW 
wind machine. It's be producing for years now, only 190W but it works. It does 
over voltage the inverter sometimes. But it always comes back online. If 
someone smart could figure a way to parallel more micros....

Jesse
Sent from my iPhone

> On Sep 6, 2014, at 1:29 PM, "Chris Daum" <[email protected]> wrote:
> 
> Already figured that out (oh yeah, and he is cheap besides!)
>  
> Have a great weekend!
> 
> From: RE-wrenches [mailto:[email protected]] On 
> Behalf Of Larry Crutcher,Starlight Solar Power Systems
> Sent: Saturday, September 06, 2014 10:17 AM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Grid-tie inverter for wind generator
> 
> Chris,
> 
> I would not touch that with a..….20 foot pole. It will never work right and 
> he will assign you the blame when he sees his electric bill go down by $1 per 
> month.
> 
> Larry
> 
> On Sep 5, 2014, at 9:42 AM, Chris Daum <[email protected]> wrote:
> 
> One killowatt, and three wire.  He's been using it with some heating elements 
> as a dump load, to make hot water.  And he just sent me a picture -- heck, 
> it's on something like a 20 ft. pole, so no wonder it's not making much 
> power!  Also he doesn't want to spend a lot of money, so I suspect the Aurora 
> (which would be a pretty good deal) will still be too costly for him.
>  
> His machine's output is put through rectifiers to make the battery voltage. 
>  
> --Chris @ the Oasis Montana
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/[email protected]/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to