Wrenches,

        Thanks for all the response regarding the OB BTS.  Fortunately I have 
since found an old OB version banging around so will head back to the install 
to swap it out.

Bill


  ----- Original Message ----- 
  From: b...@midnitesolar.com 
  To: RE-wrenches 
  Sent: Friday, September 12, 2014 6:51 PM
  Subject: Re: [RE-wrenches] BTS


  On 9/12/2014 6:40 PM, All Solar, Inc. wrote:

    Pretty sure Midnite sent out some of the classics with a Magnum BTS. Due to 
part shortage.?
    Installed one in June this year. 



  Yep.   Gotta stay on top of this stuff, especially when building in the good 
ole US of A !

  Luckily, it was a short lived issue.  But, different  and kinda fun in a way.

  boB





    Jeremy Rodriguez, 
    President



    All Solar, Inc.  
    1463 M

    Penrose Colorado 81240
    719-372-3808 office
    719-372-3804 fax
    www.asolarelectric.com


    Sent by Jeremy's iPhone. Sorry for typos and shorthand!

    On Sep 12, 2014, at 4:10 PM, "b...@midnitesolar.com" 
<b...@midnitesolar.com> wrote:



      2 cents here...

      As far as I remember,  OB is 10K Ohms (at 25degrees C), MidNite is 10K,
      Magnum is 100K and Xantrex/Trace/Schneider is 100K

      Magnum has a couple of swapped lines compared to the other BTS' but ~may~ 
or may not
      work for others in some instances.

      boB


      On 9/12/2014 2:48 PM, Jerry Shafer wrote:

        No it will not work right

        On Sep 12, 2014 2:56 AM, "frenergy" <frene...@psln.com> wrote:

          Wrenches,

                  I just replaced a failed XW..... is the XW BTS compatible 
with an FM60?  Thanks in advance,

          Bill

          <mime-attachment.jpg>





      _______________________________________________
      List sponsored by Redwood Alliance

      List Address: RE-wrenches@lists.re-wrenches.org

      Change listserver email address & settings:
      http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

      List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

      List rules & etiquette:
      www.re-wrenches.org/etiquette.htm

      Check out or update participant bios:
      www.members.re-wrenches.org



     

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org





------------------------------------------------------------------------------


  _______________________________________________
  List sponsored by Redwood Alliance

  List Address: RE-wrenches@lists.re-wrenches.org

  Change listserver email address & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out or update participant bios:
  www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to